Sorry, I don't see it. (I'll look at PIPEDEOM soon).
There will be no leading spaces after:
"| SPEC PAD 0 W2 1.4 RIGHT W1 NW W3-* NW",
Output from this stage:
1000 MDISK 3390 DEVNO 7200 MWV ALL ALL ALL
1001 MDISK 3390 DEVNO 7201 MWV ALL ALL ALL
1002 MDISK 3390 DEVNO 7202 MWV ALL ALL ALL
1003 MDISK 3390 DEVNO 7203 MWV ALL ALL ALL
:
:
150F MDISK 3390 DEVNO 8D1F MWV ALL ALL ALL
0500 MDISK 3390 DEVNO 8D20 MWV ALL ALL ALL
0501 MDISK 3390 DEVNO 8D21 MWV ALL ALL ALL
Frank M. Ramaekers Jr.
-----Original Message-----
From: CMSTSO Pipelines Discussion List
[mailto:[email protected]] On Behalf Of Mike Walter
Sent: Thursday, June 09, 2011 1:43 PM
To: [email protected]
Subject: Re: [CMS-PIPELINES] Help with OUTSIDE
The best answer would suggest that you download PIPDEMO from:
http://www2.marist.edu/~pipeline/
(and not being modest, also PDEM MODULE).
...then run your pipe with a small test file and watch as the records
pass
from one stage to the next.
The answer will jump out at you, and you'll be able to use PIPEDEMO to
diagnose your next pipe problem/question, too!
But the direct answer is to insert a stage before those you showed:
"| STRIP LEADING BLANK"
Mike Walter
Aon Corporation
The opinions expressed herein are mine alone, not my employer's.
"Frank M. Ramaekers" <[email protected]>
Sent by: "CMSTSO Pipelines Discussion List"
<[email protected]>
06/09/2011 01:21 PM
Please respond to
"CMSTSO Pipelines Discussion List" <[email protected]>
To
[email protected]
cc
Subject
Help with OUTSIDE
Directory statements are input:
"| ABBREV MDISK 1",
"| SPEC PAD 0 W2 1.4 RIGHT W1 NW W3-* NW",
"| SPEC 1.4 X2C 1.2 1-* 3",
"| OUTSIDE X1000 X1BFF",
"|CONSOLE"
I don't get anything, although I do have MDISK statements OUTSIDE the
range of 1000-1BFF in the input directory. What am I doing wrong?
Frank M. Ramaekers Jr.
Systems Programmer
MCP, MCP+I, MCSE & RHCE
American Income Life Insurance Co.
Phone: (254)761-6649
1200 Wooded Acres Dr.
Fax: (254)741-5777
Waco, Texas 76701
_____________________________________________________
This message contains information which is privileged and confidential
and
is solely for the use of the
intended recipient. If you are not the intended recipient, be aware that
any review, disclosure,
copying, distribution, or use of the contents of this message is
strictly
prohibited. If you have
received this in error, please destroy it immediately and notify us at
[email protected].
The information contained in this e-mail and any accompanying documents
may contain information that is confidential or otherwise protected from
disclosure. If you are not the intended recipient of this message, or if
this message has been addressed to you in error, please immediately
alert the sender by reply e-mail and then delete this message, including
any attachments. Any dissemination, distribution or other use of the
contents of this message by anyone other than the intended recipient is
strictly prohibited. All messages sent to and from this e-mail address
may be monitored as permitted by applicable law and regulations to
ensure compliance with our internal policies and to protect our
business. E-mails are not secure and cannot be guaranteed to be error
free as they can be intercepted, amended, lost or destroyed, or contain
viruses. You are deemed to have accepted these risks if you communicate
with us by e-mail.
_____________________________________________________
This message contains information which is privileged and confidential and is
solely for the use of the
intended recipient. If you are not the intended recipient, be aware that any
review, disclosure,
copying, distribution, or use of the contents of this message is strictly
prohibited. If you have
received this in error, please destroy it immediately and notify us at
[email protected].
