Thanks, Alain.
Could I trouble you for
Note the the length of the command response changes between the two
diagnose instructions; on the first one it is effectively x'90e5d', but
on the second it is only x'90cfe', the difference being x'14f' or
thereabouts.
Would you try the failing pipe once more, but without RUN on the trace
command and then see what is in storage at address R3 + R5 on the second
diagnose instruction? This would be where the missing output is likely
to be.
On 07/02/2015 01:53 PM, Alain Benvéniste wrote:
John,
Valid range are 8000-87BF and 660A-660F
The rest does not exist
Ready; T=0.02/0.03 13:41:59
cp trace diag 8 run cmd d psw g
Ready; T=0.01/0.01 13:42:25
pipe cp q da details 8000-8FFF 660A !> a a a
-> 0180BACE EX 44001000 01855FB8 DIAG 83240008 00000008
PSW = 03EC1000 8180BAD2
GPR 0 = 0183F447 01855FB8 3F997F00 3F997FF0
GPR 4 = 00000000 0008EE5D 3F99AAA8 3F99D078
GPR 8 = 3F9888F8 3F99AC50 BF988F04 3F997E38
GPR 12 = 8180BAA0 3F997EA8 97899788 0180BA9E
-> 0180BACE EX 44001000 01855FB8 DIAG 83240008 00000008
PSW = 03EC0000 8180BAD2
GPR 0 = 000121CC 01855FB8 3F997F00 3F8DF1A0
GPR 4 = 00000028 00090CFE 3F99AAA8 3F99D078
GPR 8 = 3F9888F8 3F99AC50 BF988F04 3F997E38
GPR 12 = 8180BAA0 3F997EA8 97899788 0180BA9E
Ready(00040); T=0.01/0.26 13:42:56
sp cons close
-> 00F1E59C DIAG 83130008 00000008
Ready; T=0.01/0.02 13:46:27
q 660A-660B
DASD 660A CP SYSTEM 630WV2 140
DASD 660B XX660B
Ready; T=0.01/0.01 13:46:34
q 8FF0-8FFF
HCPQDV1003E 8FF0-8FFF was not found.
Ready(01003); T=0.01/0.01 13:47:01
q 87BF
DASD 87BF XX67BF
Ready; T=0.01/0.01 13:47:11
Le 02/07/2015 12:39, « CMS/TSO Pipelines Discussion List on behalf of John
P. Hartmann » <[email protected] on behalf of
[email protected]> a écrit :
Alain, have you got devices 8FFF, 660A and 660B?
Please do
CP TRACE DIAG 8 RUN CMD D PSW G
while running the failing pipeline.
On 06/30/2015 04:06 PM, Alain Benveniste wrote:
Hi,
If i do a q da details 8000-8FFF 660A through CP I get the result, with
a PIPE CP ...... !> a a a, 660A does not appear in the result, the same
with 660A-660A instead. With 660A-660B it works.
Regards
Alain
