If you can make a clean slit in the rubber bung to the hole you drill for
the wire size it will fit over the wire then seal nicely when compressed -
did that with the radar cable when it had a large plug installed on each
end. They work well. Cheers

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Rich Knowles
Sent: September-23-12 1:25 PM
To: [email protected]
Subject: Re: Stus-List Holes in deck

They are excellent, use them all the time, but they have to be installed
over the hole and then run the wires. I understood the challenge to be how
to seal the holes with the wires already run. Hence the goop suggestion. 

Rich Knowles
Indigo. LF38
Halifax

On 2012-09-23, at 17:10, Charles Nelson <[email protected]> wrote:

Just what I need!

The list never ceases to come thru!!

Thanks,

Charlie Nelson

Sent from my iPad

On Sep 23, 2012, at 8:09 AM, Wally Bryant <[email protected]> wrote:

> Will one of these things fit?
<http://bluesea.com/category/82/productline/overview/1>  I have four of them
for various wires that must pass through the deck.  You can add and change
wires over time, and they're *totally* waterproof.  Heck, two of them handle
wires from my solar panels, which pass through the deck by a stanchion base.
Probably the wettest place on the boat when sailing in any kind of swell.
> 
> Wal
> 
> [email protected] wrote:
>> What is the easiest, semi-permanent solution to seal the hole with the
cable in it.
> 
> 
> --
> s/v Stella Blue
> www.wbryant.com
> 
> 
> _______________________________________________
> This List is provided by the C&C Photo Album 
> http://www.cncphotoalbum.com [email protected]

_______________________________________________
This List is provided by the C&C Photo Album http://www.cncphotoalbum.com
[email protected]

_______________________________________________
This List is provided by the C&C Photo Album http://www.cncphotoalbum.com
[email protected]


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]

Reply via email to