Dennis,
Since mine is not leaking into the bilge and freezing is not an issue here, I
think that I'll go with your approach even though my crack is much more
extensive. I have to wonder if they didn't overdo the prep work when the
barrier coat was applied 6 or 8 years ago. Wally, you dropped your keel and
redid the joint, an input?
James
Delaney 38 Mk11
Oriental, NC
----- Original Message -----
From: Dennis C.
To: cnc-list@cnc-list.com
Sent: Tuesday, October 16, 2012 7:55 PM
Subject: Re: Stus-List C&C 115 new keel joint video
Torque the keel bolts to recommended spce, slap a layer of glass tape around
the hull keel joint and go sailing. That's what I did 12 years ago and haven't
seen any cracks or issues since. Have bounced on the bottom a few times since
also.
It's Touche' that's on the DIY "Fixing the C&C Smile" link on the photoalbum
site.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
----------------------------------------------------------------------------
From: jtsails <jtsai...@gmail.com>
To: cnc-list@cnc-list.com
Sent: Tuesday, October 16, 2012 6:06 PM
Subject: Re: Stus-List C&C 115 new keel joint video
Gary,
I really!!!!!! don't like hearing that. This is a project that I'm going
to have to tackle on my 38' as well. The keel joint is showing a definite crack
along the entire length but I don't have any water in the bilge at this point.
Advice?
James
Delaney
C&C 38 1976
Oriental, NC
----- Original Message ----- From: <ahycr...@cox.net>
To: <cnc-list@cnc-list.com>
Sent: Tuesday, October 16, 2012 6:20 PM
Subject: Re: Stus-List C&C 115 new keel joint video
> Joel
> Two years ago I did the same thing to "Liberty" a 1976 38' MK I.
Unfortunately we discovered that all the keel bolts had to be replaced as well.
The bill for the whole thing was around 12K. I have a log as well as pics of
the whole ugly affair.
>
> Gary Kolc
>
> ---- Joel Aronson <joel.aron...@gmail.com> wrote:
>> I'm glad I didn't get that bill!
>>
>> Joel
>> Sent from my iPad
>>
>> On Oct 16, 2012, at 5:33 PM, Martin DeYoung <mdeyo...@deyoungmfg.com>
wrote:
>>
>> This story on the Three Sheets Northwest web site may be interesting to
>> C&C’rs thinking about a keel joint rebed project.
>>
>>
>>
>>
http://threesheetsnw.com/blog/2012/10/racing-sailboat-dacha-gets-a-new-keel-joint/
>>
>>
>>
>> Martin
>>
>> Calypso
>>
>> 1970 C&C 43
>>
>> Seattle
>>
>>
>>
>> _______________________________________________
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
------------------------------------------------------------------------------
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
