I had to fix a 3' by 5' spot of wet core on my 90' 34r ahead of the keel this winter do to 3 limber holes drill through the hull in to the core. I sealed the limber holes with splash zone. I tried epoxy but the core in the frames was to wet after 2 months in heated storage with fans. It turned out grate. You can build up a flange on either side of the frame and on the deck to really seal it. The copper tubing is grate on a bench with new material but hard to do right up side down in the bilge. I have used splash zone on every thing from keel pipes to emergency hull repair. The stuff is a no sail item on my boat.
Ryan Raber Scapa 90' 34/36r #9 Falmouth, Maine _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
