I'll be brief, I have the Isotherm and like it, but (always but) might do the Frigoboat next time.
Pros - Works well Quiet Small, easy to tuck out of the way Plenty of cold - I boxed off a space under the cold plate, and it keeps (or makes) ice. ASU conserves battery when away from the dock. Mark at Great Water is great to work with Cons - Replaced the ASU module twice now, not a cheap date. Replace the Water pump once - (Zebra Mussels) Clogging - if our Freighter Friends had not gifted us with Zebra Mussels, I may not have had nearly the problems, which is why the Frigoboat looks appealing with keel cooler. The latest module I got this summer worked great, maybe it is a little smarter than the previous ones. Probably if I would put a 3 way valve in so I could inject Chlorine every week things would be better. Bill Coleman C&C 39 -----Original Message----- From: CnC-List [mailto:[email protected]] On Behalf Of Joel Aronson Sent: Sunday, February 17, 2013 10:49 AM To: [email protected] Subject: Stus-List refrigeration - icemaker? I'm looking at adding refrigeration to my ice box. I'm down to 2 choices - An Isotherm with a Danfoss 50 compressor and a flat cold plate or an Adler Barbour with the same compressor but with a plate that forms a small freezer/icemaker section (15 x 12 x 6 inches). The A/B is about $500 more. Do you make ice? If you can't, do you wish you could? Joel 35/3 Annapolis Sent from my iPad _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
