I don't have a 35 but on my 30-1 I just re-plumbed the existing water tank into a holding tank. First, I plugged and laminated over the 1" outlets at the bottom. Then, I drilled a new 1 1/2" inlet at the top on the aft end and installed a barbed through hull for the head discharge hose. Next, I constructed an angled dip tube out of 1 1/2 " pvc pipe and glassed it in to run from the original water fill inlet hose on the forward end of the tank to within 1" of the lowest part of the tank. I replaced the original water fill and vent hoses with appropriate sanitation type hoses and installed a carbon filter in the vent line.
Someday, I'll replace the deck fitting so that it reads "waste" instead of "water"! Hope that helps. Rick Bushie s/v Anchovy, 1971 30-1, Hull #1 Worton Creek, MD
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
