The pedestal guard should run through the deck into the bilge. You can run a couple wires through each tube. If you are runnng NMEA 2000 devices it is a PIA but doable. The other option is to get waterproof clamps from Blue Seas or others and drill through the deck.
Joel Sent from my iPad On May 4, 2013, at 11:10 AM, Robert Gallagher <[email protected]> wrote: > I am getting ready to fully wire my Chartplotter/depth/ to power, depth > transducer, and Ais GPS that is located down below. > > There is not enough room to go through the pedestal as the autopilot and > engine cables are taking up most of the space and I don't want anything to > get tangled. > > The pedestal guard is the obvious choice but there are NO HOLES down there. > Only nuts on studs or bolts at the base of the guard tubes. > > HELP! > > A new pedestal guard seems like overkill just to run wires. And yes, I need > the chartplotter at the helm. > > Thanks in advance, I know someone will come up with a solution :) > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
