Joel,
I have often thought of using the Plasteak for the cockpit sole and the
seating areas. It looks good and will make a good non-skid area as well. My
only concern would be with the heat of summer that I couldn't go barefoot
anymore. My non-skid is pretty smooth at the helm. I thought a teak block
or two might help, but I didn't want any more toe-stubbers in the cockpit
either!
Jake
Jake Brodersen
C&C 35 Mk-III
Midnight Mistress
Hampton VA
cid:image001.png@01CE3D06.5A990940
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
Sent: Thursday, May 30, 2013 9:47 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List non-skid paint
Joel,
You ain't gonna like my opinion.
Rent a gelcoat color book from fibreglast.com, $5. Match the color and
order a gallon of tinted gelcoat. Double-tape the cockpit sole. Mix up the
gelcoat with some colloidal silica and roll it on with a resin resistant
roller. Finish by rolling in one direction. Wait until the gelcoat begins
to harden a bit and pull the tape.
Voila! Factory non-skid.
It really is that easy.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
<<image001.jpg>>
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
