Jake, I considered it on my Pearson but was not confident in my skills, so I went with Interlux paint. With the pedestal etc. I'm not going to try.
One thing I may borrow from the J35s - they have a piece of teak about 1 inch square bolted to the inboard edge of the seats as a cleat to make it easier to get on the rail. They are low enough that you can sit on them. When I'm in Bacon's I'll rummage in the back for some teak. I also want to make a fiddle for the nav table. I forget to clean it off. One tack and everything slides off. On Fri, May 31, 2013 at 6:55 AM, Jake Brodersen <captain_j...@cox.net>wrote: > Joel,**** > > ** ** > > I have often thought of using the Plasteak for the cockpit sole and the > seating areas. It looks good and will make a good non-skid area as well. > My only concern would be with the heat of summer that I couldn’t go > barefoot anymore… My non-skid is pretty smooth at the helm. I thought a > teak block or two might help, but I didn’t want any more toe-stubbers in > the cockpit either!**** > > ** ** > > Jake**** > > ** ** > > *Jake Brodersen* > > *C&C 35 Mk-III* > > *Midnight Mistress* > > *Hampton VA* > > * * > > [image: cid:image001.png@01CE3D06.5A990940]** > > ** ** > > ** ** > > ** ** > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Dennis > C. > *Sent:* Thursday, May 30, 2013 9:47 PM > *To:* cnc-list@cnc-list.com > *Subject:* Re: Stus-List non-skid paint**** > > ** ** > > Joel, > > You ain't gonna like my opinion. > > Rent a gelcoat color book from fibreglast.com, $5. Match the color and > order a gallon of tinted gelcoat. Double-tape the cockpit sole. Mix up > the gelcoat with some colloidal silica and roll it on with a resin > resistant roller. Finish by rolling in one direction. Wait until the > gelcoat begins to harden a bit and pull the tape. > > Voila! Factory non-skid. > > It really is that easy. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA**** > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Joel 301 541 8551
<<image001.jpg>>
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
