Hi David
I recently overhauled my 28s, it is just the 4 bolts - nothing hidden.
Maybe leave the bolts off, put the drum back on , insert handle and pull
a rope? You just need it to break free, I would not think it will take
much.
Graham Collins
Secret Plans
C&C 35-III #11
On 2013-07-22 3:43 PM, David Risch wrote:
I am breaking down a Barient 28 for lubing and want to verify what I am seeing.
After removing drum et al I unscrewed the 4 large allen bolts holding down the
center spline and gears to the base.
And there it still sits.
It seems as though the base attached to the boat and the center spline have
fused where the bolts are inserted. What I want to clarify is that there are
no additional hidden bolts. In addition what are the best practices of freeing
up the spline from the base (aside from the usuals: PB Blaster, targeted whacks
with hammer and screw-driver etc).
Thanks in advance.
1981 40-2
David F. Risch
(401) 419-4650 cell
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
