Ice block melt test. I would encourage anyone considering this exercise to read Don Casey's book "This Old Boat". He goes into detail about ice box insulation, the best way to do it, how not to do it and how to quantify what difference you might have made.
Steve Suhana, C&C 32 Toronto On Wed, Feb 5, 2014 at 12:18 PM, Alan Bergen <[email protected]>wrote: > > I glued two inch closed cell foam to the under side of the top of the ice > box. I also drilled a hole through the wall just aft of the stove, and > injected foam into the void. The can comes with a long tube which I > inserted as far as it would go toward the port side of the boat, and > practically emptied the can. I'm sure I didn't fill all of the void, but > the extra foam probably made a difference. > > Alan Bergen > 35 Mk III Thirsty > Rose City YC > Portland, OR > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
