Steve,
My hull # is 224. I suspect that Tom's hull # may be 197. John From: CnC-List [mailto:[email protected]] On Behalf Of Stevan Plavsa Sent: Thursday, February 06, 2014 8:14 AM To: [email protected] Subject: [SPAM]Re: Stus-List C&C 32 stern pulpit John, you sure about that hull number? I didn't think they made that many. I'm hull #59. Steve Suhana, C&C 32 Toronto On Wed, Feb 5, 2014 at 6:03 PM, Tom Anderson <[email protected]> wrote: John, FYI, My 32 came with a gate on the upper rail from the factory. Hull number 1197. Tom Anderson C&C 32 Nonpareil Marblehead, MA 95 days to launch 97 days to first Wednesday Night Race From: CnC-List [mailto:[email protected]] On Behalf Of John Russo Sent: Wednesday, February 05, 2014 2:34 PM To: [email protected] Subject: Re: Stus-List Climing over the stern rail is a pain I have a 32 with a double rail at the stern and am thinking about cutting the upper and adding a gate. My swim ladder actually comes slightly above the lower rail when up where it tie it. My concern is that I have a motor mount and a 65 Lb outboard on the stern rail port side vertical post which I will have to shift more to port but wondered about the rail strength after cutting. Any thoughts? I am also looking for a lighter outboard with a little less HP. John Arpeggio 32 Norwalk CT _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
