There is not a lot of room for additional sheaves in the top casting, plus
it is useful to get the top of the spinnaker out in front, so I used the
little 'horns' which are in the top casting. Someone may have them inboard,
but I don't think the boat was designed that way.
I have two jib halyards on the forward side of the mast and the main on the
aft side plus the pole lift - all in the mast. Spinnaker is outside.
Gary
#593
----- Original Message -----
From: "Kirkpatrick, Jay" <[email protected]>
To: <[email protected]>
Sent: Thursday, February 06, 2014 10:28 AM
Subject: Stus-List CC30 Spin halyards
Are C&C30 mk1 spinnaker halyards always external?
Jay
C&C30 Lady Jane
BHYC
Jay Kirkpatrick
Aviation Relationship & Corporate Fuel Manager
Purolator Inc.
5995 Avebury Drive, Mississauga, ON
905.691.0659
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
