My prop is folding, not feathering. On a non-geared folder If you have the blades on a vertical plane, the lower blade will hang down from gravity / add additional drag. On horizontal plane they fold together completely (Looks like a seaweed) and minimize drag. If it's a geared folder, they will fold completely no-matter the angle
That's per Martec's instructions. See comment about the Pivot point (Shaft) being set vertical (Making the blades horizontal) http://www.martec-props.com/install_eliptec.htm As for the rebuilds, they are about a hundred bucks with Martec. They re-drill the hub, install a larger diameter shaft, re-drill the blades, balance and polish the whole thing. The prop looked brand new. Call the MFG to get an idea if you are out of specs. My blades wiggled more than 1 inch at the tips so it was pretty obvious.. -Francois Rivard 1990 C&C 34+ "Take Five" Lake Lanier, Georgia.
_______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
