Funny you mentioned that. I found it curious that my cockpit drains are
below the waterline. All my cockpit drains in my old boat were (just) above
the waterline. That seems like a more prudent practice. Not sure the logic
behind this practice. 

 

From: CnC-List [mailto:[email protected]] On Behalf Of Josh
Muckley via CnC-List
Sent: Wednesday, July 09, 2014 10:11 AM
To: C&C List; [email protected]
Subject: Re: Stus-List seacocks

 

Curtis,

Cycling the seacocks is a great practice.  I hope you misspoke when you said
you have seacocks on your cockpit drains closed.  Maybe I misunderstand but
if the drains are closed where does the water go when it rains?  Similarly,
ice dams in cockpit drains has sunk boats at the dock through the winter
months.  I guess in SC you don't have to worry about that though do you!?

Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD

On Jul 9, 2014 10:01 AM, "Curtis via CnC-List" <[email protected]>
wrote:

I have a C&C30 MK1 with a updated 2GM20F . I run the engine compartment
blower to suck out the heat and vent the area while running. But not for the
extraction of CO2. I haven't worried about that. With an open forward hatch
and and the cockpit hatch open pushing no less than 3 knots of  winds threw
the cabin house I would not think it CO2  be a problem. Maybe it could be a
problem on the hook charging batteries in a rain, with the boat sealed up
and not venting the exhaust. 

 

Sea Cocks. I have my boat at the dock. I visit it weekly, some times 2 times
a week. The Sea cocks are always closed unless needed. This habit makes you
work them or not sail. It is a great policy for required maintenance. If
they stay closed unless needed you will give them a work out each time you
use the boat. I have a 

1) Port side cock pit drain, 

2) I have a starbord cockpit drain that has a Y fitting to drain the gally
sink.

3) I have a raw water intake for the engine.

4) I have a raw water intake for the head.

5) I have a drain for the Head

6) I have a drain for the Head sink

They all get a turn or two each week.

 

Its a small chore but gives me "peace" of mind.

 

Curtis

C&C 30 MK1 675M81E

 

 

On Wed, Jul 9, 2014 at 12:54 AM, Chuck S via CnC-List
<[email protected]> wrote:

Bob,

seacocks

I'm keeping my boat 2 1/2 hrs from home and closing seacocks more than I
used to.  I'm trying to develop better habits closing up the boat prior to
leaving for the week.  Got any tips or maybe a checklist?

 

 

 

Chuck
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md

 

  _____  

From: "CNC boat owners, cnc-list" <[email protected]>
To: "CNC boat owners, cnc-list" <[email protected]>
Sent: Wednesday, July 9, 2014 12:27:22 AM
Subject: Stus-List Atomic 4

 

I tried to stay out of this one, but the Irish whiskey has taken over.

 

Atomic four engines are safe if properly maintained.  Those of you who claim
otherwise are just blowing smoke.

 

Those of you who are under the impression that a diesel upgrade saving you
.5 gallons per hour will pay off in a lifetime of a weekend sailor have lost
the plot or have not done the simple math.

 

US$10,000.00 for a diesel upgrade, saving US$2.00 in fuel per hour of
motoring will take how long to pay for itself?  (My old A4 burned about 3/4
to 1.0  gallon an hour, my Yanmar turns 1/2 - 3/4 a gallon per hour.)

 

For those of you so scared of gasoline engines, how many of you keep a car
or two, lawn mower, weed whacker, leaf blower, spare gas can, oil, paint,
spray cans, etc. ad nauseam in your attached garage?  Really?

 

How many of you keep that gas grill and/or spare propane tanks in that same
garage?  Or sitting on the deck outside your bedroom window?

 

How many of you have a smoke detector and CO2 detector on your boat?

 

Those of you who throw stones better not have your kids napping in the
Vberth whilst you run that motor without CO2 detector(S).

 

The key to ANY engine is maintaining it.  Constantly.  Regular periodic
maintenance and upgrades.  Just like any other gas engine, you can't leave
it for a decade and expect your fuel lines, tank or carb not to develop
problems.

 

Install a quality petcock on the fuel lines and close it when you close the
through hulls at the end of the day....  Oh, you don't close your through
hulls?...  Never mind.

 

Rant complete, over and out.

 

Rob

 

 


_______________________________________________
This List is provided by the C&C Photo Album

 

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

 

 


_______________________________________________
This List is provided by the C&C Photo Album

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com






-- 
"All men dream: but not equally. Those who dream by night in the dusty
recesses of their minds wake up in the day to find it was vanity, but the
dreamers of the day are dangerous men,for they may act their dreams with
open eyes, to make it possible."

T. E. Lawrence

. 





_______________________________________________
This List is provided by the C&C Photo Album

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



_______________________________________________
This List is provided by the C&C Photo Album

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to