Bill, Contact Fred "Hutch" Hutchinson at PYI. He'll be able to tell you immediately where to start.
[email protected] Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Jul 28, 2014 12:16 AM, "Bill Hoyne via CnC-List" <[email protected]> wrote: Hi All, I have a Max Prop of unknown diameter (forgot to measure when I had the boat out of the water). I also have a Volvo Penta 2003 and when I run the engine in idle I get 3000+ RPM,s but when I run it in gear I only get 1900-2000 RPM's. I suspect the pitch is a little high. ( A dripless seal, new shaft and cutless bering were installed last year and in the process the max-prop was taken off and may not have been installed with the original specs of which I don't have from the PO.) My question in does anybody out there know what the X,Y values should be for a typical C&C MKII? I would like a starting point to compare what is in the prop now and where I should head to. The other question is can I do thin in the water or do I need to haul the boat? Thanks, Bill *Bill Hoyne* Mithrandir '74 C&C35 MkII in Victoria,BC On Jul 24, 2014, at 5:01 PM, Chuck S via CnC-List <[email protected]> wrote: As stated before, I like to follow the manufacturer's recommendation and use Lubriplate 130 AA for MaxProp. It is a grease that works well on bronze parts. The base is the same for Lewmar winch grease. I opened our MaxProp this winter after 7 years on the boat, and found the metal clean, bright gold in color, and shiny. No oxidation at all. Thanks, Lubriplate. Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md ------------------------------ *From: *"CNC boat owners, cnc-list" <[email protected]> *To: *"CNC boat owners, cnc-list" <[email protected]> *Sent: *Thursday, July 24, 2014 10:23:50 AM *Subject: *Stus-List Prop Grease Subject change. Has anyone tried Krazy Grease, a waterproof grease in cartridges that is advertised as being the greatest thing since short skirts? Might be good on MaxProps etc. See www.krazygrease.com Rich Knowles INDIGO LF38 Halifax, NS. _______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
