Ron,
I am using a Fusion MS-IP600 stereo unit mounted in the cabin. What you see in the cockpit in the YouTube video is a Fusion MS-WR600 wired remote. I can control all the functions of the cabin mounted unit from the cockpit remote. (Not just the volume) I installed the remote in an existing access port so I didn't have to drill additional holes in the cockpit. The access port was factory installed to access the shore power plug and other hidden stuff. I used two sound exciters per channel. (4 total) The foam adhesive rings that hold the exciter in place has a very aggressive adhesive. I did however sand the backside of the cockpit seat backs to create a very smooth surface. Final grit was 400. The exciter sticks much better to smooth surfaces. There is some information about the specific sound exciters that I installed located in the description on YouTube. When the cncphotoalbum.com site had the FORUM functioning, I had posted some still photos of the actual exciter installation with an explanation of the installation. I guess that's gone now unless Stu can set up the FORUM again. Ted Drossos C&C 29-2 H2OT Long Island, NY
_______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
