Recently bought a 41 with full knowledge that there were some issues, mainly with the rig. Have replaced all the wire/rope halyards with rope, in the process of replacing the running backs and checkstays with amsteel. Have replaced the mainsheet system with a 6/1 cleated at the traveller rather than the secondaries. Took the sails off today for winter and got a good look at things. Putting Delrin washers on the vang and gooseneck (Idea I got here). Now noticed outhaul and second reef lines cross on the way up to the boom and again inside the boom. Cannot figure out how to re do them without taking the boom apart? Any ideas on how to re-string lines inside the boom without tangling them or dismantling the boom ends?
Rex & Jennifer Delay www. Ghostlake.com <http://www.ghostlake.com/> www.ghostlakesailing.com
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
