I found that the Qest fittings were very space efficient, only rivalled by copper. So I plumbed a manifold that would meet my needs. For one reason or another the Raritan water heaters are quite expensive so I rebuilt mine. I posted these last year. https://drive.google.com/folder/d/0B8pEh5lnvP1ydEpoMU1MWmx6Qms/edit
Josh On Jan 27, 2015 1:00 AM, "Kevin Driscoll via CnC-List" < [email protected]> wrote: > I am having difficulty finding a source for the press/nipple fitting on > the gray semi rigid PVC plumbing for our water system on our 89 30-2. One > of the fitting s has been weeping a bit at the Raritan 6 gallon hot water > tank I replaced recently. I suspect they are not intended to be reused or > it was deformed by over torquing by amateur marine plumbers such as myself. > Any leads? Has everyone moved on to PE and quick connect fittings? > > I don't have a good photo except of the old heater before I removed it. > The image is looking down onto the heater with the water supply on the > right. The broken coupling was someone else's doing but was water tight. > https://docs.google.com/file/d/0BwhcX19YaPJ8ZmlnVkEzTTVySXM/edit?usp=docslist_api > > Thanks again. > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
