Are you sure that they are not the PVC fittings that you get at Home Depot or Lowes? They look to me very similar to what one would use for the cottage water supply lines.
Marek (in Ottawa) From: Kevin Driscoll via CnC-List Sent: Tuesday, January 27, 2015 12:59 AM To: C&C List Subject: Stus-List Gray PVC plumbing fittings source? I am having difficulty finding a source for the press/nipple fitting on the gray semi rigid PVC plumbing for our water system on our 89 30-2. One of the fitting s has been weeping a bit at the Raritan 6 gallon hot water tank I replaced recently. I suspect they are not intended to be reused or it was deformed by over torquing by amateur marine plumbers such as myself. Any leads? Has everyone moved on to PE and quick connect fittings? I don't have a good photo except of the old heater before I removed it. The image is looking down onto the heater with the water supply on the right. The broken coupling was someone else's doing but was water tight. https://docs.google.com/file/d/0BwhcX19YaPJ8ZmlnVkEzTTVySXM/edit?usp=docslist_api Thanks again. -------------------------------------------------------------------------------- _______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
