Wow! That is a serious penalty. It is three to six around here. Three if in an aperture and six if out in the open.
And....the Flex-o-fold is a geared prop so the blades open together and close together. I have not heard of any of them not opening, unless they have been sitting around so long that they are encrusted with junk/barnacles so bad that they wouldn't work even if they were fixed. I deliver boats for our museum's donation program and have run into a couple which were so dirty that the prop was just a blob of crud - no thrust. Didn't make a difference if it was folding (they weren't) or not. Gary ----- Original Message ----- From: D.J. Platt via CnC-List To: Alan Lombard ; cnc-list@cnc-list.com Sent: Monday, February 02, 2015 10:35 AM Subject: Re: Stus-List Folding/feathering Props Towed in a few boats with props not opening from our club. If you race the current penalty is 12 seconds per mile. Don't care for them myself. From: Alan Lombard via CnC-List Sent: Saturday, January 31, 2015 4:10 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Folding/feathering Props Hello Gary, I too have a C&C 30 and am debating either a Gori or a FlexoFold. Do you remember what size Flexofold you have, and can you comment if it seems the right size. The recommendation Flexofold have made to me is 2-blade 15x11R. Thanks, Alan ------------------------------------------------------------------------------ _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ------------------------------------------------------------------------------ _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com