Re: Stus-List Window Installation - 1985 41

Thu, 12 Feb 2015 13:19:28 -0800

‎Engineers know stuff! 

sam :-)
From: dwight veinot via CnC-List
Sent: Thursday, February 12, 2015 12:15 PM
To: Rick Brass; [email protected]
Reply To: dwight veinot
Subject: Re: Stus-List Window Installation - 1985 41

Rick

Is it really true that the designers at C&C expected glued on acryllic ports to stiffen the whole boat

Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS


On Thu, Feb 12, 2015 at 10:21 AM, Rick Brass via CnC-List <[email protected]> wrote:
I have the aluminum frame windows on both my boats, which I consider to be less stylish but much more practical, so I'm basically just an interested onlooker to this discussion. But it seems to me a point made several years ago in a similar thread has been lost here.

The frameless windows were glued into the deck/cabin structure and helped to stiffen it, which also helps to stiffen the whole boat.

Plexus seems a right PITA to use, but it has lasted the better part of 30 years on our old boats. And the comments about damaging gel oat when removing old portlights speaks to its tenacity as an adhesive.

Sika 295uv, and the 3M equivalent, are great adhesives and sealers. (And also a PITA to use. Don't even THINK about not using the primer.)  I used Sika 295 on my rebuilt hatches, and it is great for car windshields (which are bedded in rubber so the window does not crack as the car body flexes) but it remains flexible. And from the previous discussions on the list I've gotten the impression that the hull and deck flexing leads to leaks in a few years, and polycarbonate portlights held in by screws tend to get cracks at the stress points.

As I said, I have no real experience with the glued in portlight solutions and I'm happy with my simple, cheap, durable, but not stylish aluminum frames. I just wanted to remind the group about why the frameless portlights were glued in by C&C in the first place.

Rick Brass

Sent from my iPad

On Feb 8, 2015, at 20:38, Edd Schillay via CnC-List <[email protected]> wrote:

We have the frameless windows and did the replacement last Spring. We used 3M fuselage tape - and although the prep was a lot of work, we are very pleased with the end result. 


All the best,

Edd

-------------------------------
Edd M. Schillay
Starship Enterprise
NCC-1701-B
C&C 37+ | City Island, NY
-------------------------------
914.332.4400  | Office
914.774.9767  | Mobile
-------------------------------
Sent via iPhone 6
iPhone. iTypos. iApologize

On Feb 8, 2015, at 8:24 PM, Frederick G Street via CnC-List <[email protected]> wrote:

That might work; but butyl’s NOT an adhesive, so you would definitely need the screws/bolts.

Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^(

On Feb 8, 2015, at 7:22 PM, Gary Zuehlke via CnC-List <[email protected]> wrote:

Would the butyl tape work on frameless windows that were attached by screws?  What about bolts all the way through to some nice wood trim that would "clamp" the cabin top sides between the windows and interior trim?

_______________________________________________

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

_______________________________________________

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


_______________________________________________

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com




_______________________________________________

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


_______________________________________________

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to