my 33mkII did the same before, and a friend with a 33 mkII suggested to had a plastic valve right under the drain (white valve with red knob/ handle), found in hardware store and Marine store. this is way more convenient to close than the hard to reach under the port settee. easy to open and close when using the head. no more water spilling on a hard starboard beat.
Bruno Becassine Envoyé de mon iPad > Le 2015-02-20 à 19:36, Ken Heaton via CnC-List <[email protected]> a > écrit : > > Our 37 does this. It is one way to clean the heads I suppose. We close the > seacock. > > Ken H. > >> On 20 February 2015 at 19:32, mike amirault via CnC-List >> <[email protected]> wrote: >> On a C&C 33 mkii, has anyone experienced salt (or lake) water filling up >> the sink in the head when heeled over hard on a stbd tack? Mine was filling >> up and overflowing unless the sink plug was in or the drain cock closed. I >> suppose the proper thing for a seaman to do would be to close the drain cock >> but this can be inconvenient when cruising. I installed a check valve and >> this worked but it is not of marine quality and is corroding. I don't think >> a vented loop will work on a gravity fed drain. Any other solutions? >> >> _______________________________________________ >> >> Email address: >> [email protected] >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
