Winch grinding, mast climbing, bottom cleaning, anchor hauling …. Enhanced Foredeck Cow?
Dave On Mar 12, 2015, at 4:54 PM, Rick Taillieu via CnC-List <cnc-list@cnc-list.com> wrote: > Like maybe an enhanced foredeck cow? > “Hello Dr Moreau.” > > Rick Taillieu > Nemesis > '75 C&C 25 #371 > Shearwater Yacht Club > Halifax, NS. > > > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via > CnC-List > Sent: March-11-15 23:45 > To: David Knecht; CNC CNC > Subject: Re: Stus-List Tool recommendation > > hmmmm... > > Genetic engineering.... > > The possibilities...the possibilities... > > > > David F. Risch > (401) 419-4650 (cell) > > > Date: Wed, 11 Mar 2015 22:41:58 -0400 > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Tool recommendation > From: cnc-list@cnc-list.com > > I never cease to be amazed by the information I get from this list. This > group has an amazing array or talents and experiences, not just in sailing > but also in engineering, metallurgy, mechanics, chemistry etc. etc. The only > engineering I can provide advice on is genetic engineering and I suspect > there are not going to be a lot of questions on that topic. Sigh! > I will be sure to report back on tools and bolts when I find what gets this > one off. I may buy a few wrenches just to see how well each works in this > not uncommon situation. My box of ratcheting wrenches dumped over a while > back and of course ended up in the bilge in salt water. No more ratcheting > happening there. > As to my real point- I had heard about 50-50 acetone ATF a long time ago as a > penetrant so I made some up to try for this experiment, but found that the > two are not miscible and phase separate almost immediately. Is that expected > and if so, which phase for the bolt? Dave > > > Aries > 1990 C&C 34+ > New London, CT > > <image001.png> > > > _______________________________________________ Email address: > CnC-List@cnc-list.com To change your list preferences, including > unsubscribing -- go to the bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2015.0.5646 / Virus Database: 4306/9270 - Release Date: 03/10/15 > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > Aries 1990 C&C 34+ New London, CT
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com