Big ditto on Lewmars. I have had two Lewmar triples on Touché for nearly 15 years. No slippage. No damage to the lines.
IMHO Lewmar clutches are the BEST! Dennis C. Sent from my iPhone > On Mar 22, 2015, at 6:13 AM, Paul Fountain via CnC-List > <cnc-list@cnc-list.com> wrote: > > Brad, > > Perception had Schaffer stoppers on her when we got her (85 C&C 33-II K/CB). > They were chewing the new running rigging very quickly - at the > recommendation of our sailmaker we replaced them with lewmars. > > The lewmars need to be sized right for your lines, they have smaller ranges > than most stoppers, but work well, and release easily under load. > > Sent from my iPad > >> On Mar 21, 2015, at 9:42 PM, Bradley Lumgair via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> Replacing the original 7/16 halyards on our 1985 C&C 33 MKII. Got a GOOD >> price on some 3/8 Warpspeed from W.M. Does anyone know what brand/size of >> halyard clutches C&C used in '85? There is a set of double Schaefer >> clutches mounted outboard of the original triples, either side of the >> companionway, pictures I have aren't good enough to identify them and the >> boat is 3 hrs from here. >> Thanks >> Brad >> Sarnia ON >> 1985 C&C 33 "Pulse" >> >> Sent, miraculously through cyberspace, >> from my iPad! >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
