Procrastinating is always a good option. On Apr 14, 2015 12:30 PM, "Hoyt, Mike via CnC-List" <[email protected]> wrote:
> We are looking to replace the cabin sole in our Frers 33 this season. It > is comprised of horizontal floors and covered by 3/4 inch teak and holly. > This is very likely the same as many C&Cs. > > To date I can source 1/2 inch Teak and Holly locally but there is no stock > and no known reorder date for 3/4 inch. The two sources in Halifax are > East Coast Specialty Hardwood who have 1/4 and 1/2 inch in stock and are > out of stock on 3/4 and Halifax Specialty Hardwoods who only stock 1/4 and > 1/2 inch. > > This leaves me to try one of three options: > > 1- Source out of town 3/4 T&H and pay for the shipping of a 78 lb piece of > 4x8 plywood. > > 2- Use 1/2 inch in place of 3/4 > > 3- Laminate 1/4 inch on top of 1/2 inch marine plywood. > > And the always available 4th option. Procrastinate and do this next year > > Does anyone have any thoughts on this or know of other suppliers near > Halifax? > > Regards > > Mike Hoyt > 1987 Frers 33 > Persistence > Halifax, NS > > > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
