$50 cheaper in MD:)
Harry Hallgring
[email protected]
On Apr 14, 2015, at 12:47 PM, Joel Aronson via CnC-List <[email protected]>
wrote:
Come visit Maryland
http://www.exoticlumberinc.com/plywood.php
$275 a sheet.
Joel
On Tue, Apr 14, 2015 at 12:43 PM, Robert Boyer via CnC-List
<[email protected]> wrote:
Not to make things more complicated but the veneers on the currently available materials are thinner than the original T&H used in our C&Cs of the 70's and 80's.
Bob Boyer
S/V Rainy Days / Annapolis MD
1983 C&C Landfall 38 - Hull #230
email: [email protected]
blog: dainyrays.blogspot.com
"There is nothing--absolutely nothing--half so much worth doing as simply messing
about in boats." --Kenneth Grahame
On Apr 14, 2015, at 12:30 PM, Hoyt, Mike via CnC-List <[email protected]>
wrote:
We are looking to replace the cabin sole in our Frers 33 this season. It is
comprised of horizontal floors and covered by 3/4 inch teak and holly. This is
very likely the same as many C&Cs.
To date I can source 1/2 inch Teak and Holly locally but there is no stock and
no known reorder date for 3/4 inch. The two sources in Halifax are East Coast
Specialty Hardwood who have 1/4 and 1/2 inch in stock and are out of stock on
3/4 and Halifax Specialty Hardwoods who only stock 1/4 and 1/2 inch.
This leaves me to try one of three options:
1- Source out of town 3/4 T&H and pay for the shipping of a 78 lb piece of 4x8
plywood.
2- Use 1/2 inch in place of 3/4
3- Laminate 1/4 inch on top of 1/2 inch marine plywood.
And the always available 4th option. Procrastinate and do this next year
Does anyone have any thoughts on this or know of other suppliers near Halifax?
Regards
Mike Hoyt
1987 Frers 33
Persistence
Halifax, NS
_______________________________________________
Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
--
Joel
301 541 8551
_______________________________________________
Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
