Joe, I have used 202 now and before on my old C&C24 when I did Interprotect 2000. Back then I did not use chemical bonding as I did not like the "orange peel" texture of Interprotect 2000 and wanted to sand it first. The effect back then was similar to what I am getting now, without barrier coat. Did you not have any issues applying consecutive coats of VC17 ?
Marek On Mon, Apr 27, 2015 at 3:40 PM, Joseph Bognar via CnC-List < [email protected]> wrote: > Marek . Did you clean the fiberglass with 202 cleaner ? I put > inter-protect 2000 epoxy on the bottom before I applied the VC17 > > Sent from Joe Bognar > > > On Apr 27, 2015, at 11:10 AM, Rochester.rr.com via CnC-List < > [email protected]> wrote: > > Hi sounds to me like the 1st coat was not dry completely > > Brian Donovan > 112 Frisbee Hill Rd > Hilton NY 14468 > (585) 313-1940 > > On Apr 27, 2015, at 10:12 AM, Marek Fluder via CnC-List < > [email protected]> wrote: > > The specs are calling for at least 2 coats when stripped to bare > fiberglass. > First one came out nicely rolled on with 4" foam roller. > When I started the second coat I've noticed the first one gets dissolved > and white fiberglass is showing. > This brought the memories when I've done the same on my previous C&C24 - > back then I managed to do the second coat, but it was a struggle. > I am thinking of leaving only 1 coat on as it looks good. > > Has anyone put on 2 consecutive coats and what was the experience? > > Marek > C320 > Hamilton, Ontario > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
