It turns out 30 min overcoat time (in lower temps) specified by Interlux is misleading. I tried again 2 days after the first coat and found it was much better and doable. The first coat would still show signs of penetration, but only after 5-6 strokes of the roller, as opposed to 2 on the same day.
Marek On Mon, Apr 27, 2015 at 3:57 PM, Marek Fluder <[email protected]> wrote: > Joe, > > I have used 202 now and before on my old C&C24 when I did Interprotect > 2000. > Back then I did not use chemical bonding as I did not like the "orange > peel" texture of Interprotect 2000 and wanted to sand it first. > The effect back then was similar to what I am getting now, without barrier > coat. > Did you not have any issues applying consecutive coats of VC17 ? > > Marek > > > > > On Mon, Apr 27, 2015 at 3:40 PM, Joseph Bognar via CnC-List < > [email protected]> wrote: > >> Marek . Did you clean the fiberglass with 202 cleaner ? I put >> inter-protect 2000 epoxy on the bottom before I applied the VC17 >> >> Sent from Joe Bognar >> >> >> On Apr 27, 2015, at 11:10 AM, Rochester.rr.com via CnC-List < >> [email protected]> wrote: >> >> Hi sounds to me like the 1st coat was not dry completely >> >> Brian Donovan >> 112 Frisbee Hill Rd >> Hilton NY 14468 >> (585) 313-1940 >> >> On Apr 27, 2015, at 10:12 AM, Marek Fluder via CnC-List < >> [email protected]> wrote: >> >> The specs are calling for at least 2 coats when stripped to bare >> fiberglass. >> First one came out nicely rolled on with 4" foam roller. >> When I started the second coat I've noticed the first one gets dissolved >> and white fiberglass is showing. >> This brought the memories when I've done the same on my previous C&C24 - >> back then I managed to do the second coat, but it was a struggle. >> I am thinking of leaving only 1 coat on as it looks good. >> >> Has anyone put on 2 consecutive coats and what was the experience? >> >> Marek >> C320 >> Hamilton, Ontario >> >> _______________________________________________ >> >> Email address: >> [email protected] >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> _______________________________________________ >> >> Email address: >> [email protected] >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> >> Email address: >> [email protected] >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
