Yep thats Rob...useless and funny. David F. Risch (401) 419-4650 (cell)
To: [email protected] Date: Mon, 3 Aug 2015 17:13:41 +0000 Subject: Re: Stus-List 88 C&C 30 MKII Stiff From: [email protected] CC: [email protected] That is useful and funny....thank you Blair Clark 902-423-4651 From: CnC-List <[email protected]> on behalf of Robert Gallagher via CnC-List <[email protected]> Sent: August 3, 2015 2:03 PM To: [email protected] Cc: Robert Gallagher Subject: Stus-List 88 C&C 30 MKII Stiff remove the through bolts from the plate that holds the cap to the rudder post/emergency tiller point. Remove the "plastic" bearing and lubricate. Replace the bearing ant test for stiffness in the steering. If it's still stif you may need to lightly sand the inside of the bearing, as I did, and retest until you are happy with the results. It's only a couple of hours work. You will need sealant for the cap and through bolts. But first you will need to trap a spider monkey and train him or her to hold a wrench on those through bolts. I actually bribed a friend who is small and flexible. After that miserable job he's no long we my friend. Maybe I'd still have the monkey? Feel free to contact me off list if you have any questions. [email protected] Rob _______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
