While the other C&C 30mkII listers are tuned in, I am looking to replace my main soon and looking for a decent used one. If you have a back up that's not all blown out or you are thinking about replacing your current one soon, let me know...I am in the market.
Thanks! Kevin On Mon, Aug 3, 2015 at 11:12 AM RPH via CnC-List <[email protected]> wrote: > On a serious note, please disconnect shore power before sending the monkey > down below. The 110 volt wires run right into the area where he'll be > working. > > Robert H. > > > -------- Original message -------- > From: Blair via CnC-List <[email protected]> > Date: 08-03-2015 10:54 AM (GMT-08:00) > To: [email protected] > Cc: Blair <[email protected]> > Subject: Re: Stus-List 88 C&C 30 MKII Stiff > > I have a 13year old boy who is about to put your and Rob's theory to the > test [image: 😊] > > > Blair Clark 902-423-4651 > > > ------------------------------ > *From:* CnC-List <[email protected]> on behalf of RPH via > CnC-List <[email protected]> > *Sent:* August 3, 2015 2:35 PM > *To:* [email protected] > *Cc:* RPH > *Subject:* Re: Stus-List 88 C&C 30 MKII Stiff > > Blair, > > Rob (below) described the correct way to tackle the problem. I was going > to use my 11 year old daughter as my spider monkey, but I tried lubricating > without disassembly and it worked (at least for me). The "cover" that I > referred to is simply the white plastic (nylon?) cap that covers access to > the tiller fitting. Perhaps your cap is missing or stowed? > > As I said, Rob describes how to do the job properly, but I managed to fix > my problem without disassembly and my daughter still speaks to me. > > Robert H. > > > -------- Original message -------- > From: Blair via CnC-List <[email protected]> > Date: 08-03-2015 10:13 AM (GMT-08:00) > To: [email protected] > Cc: Blair <[email protected]> > Subject: Re: Stus-List 88 C&C 30 MKII Stiff > > That is useful and funny....thank you > > > Blair Clark 902-423-4651 > > > ------------------------------ > *From:* CnC-List <[email protected]> on behalf of Robert > Gallagher via CnC-List <[email protected]> > *Sent:* August 3, 2015 2:03 PM > *To:* [email protected] > *Cc:* Robert Gallagher > *Subject:* Stus-List 88 C&C 30 MKII Stiff > > remove the through bolts from the plate that holds the cap to the rudder > post/emergency tiller point. > > Remove the "plastic" bearing and lubricate. > > Replace the bearing ant test for stiffness in the steering. If it's still > stif you may need to lightly sand the inside of the bearing, as I did, and > retest until you are happy with the results. > > It's only a couple of hours work. You will need sealant for the cap and > through bolts. > > But first you will need to trap a spider monkey and train him or her to > hold a wrench on those through bolts. I actually bribed a friend who is > small and flexible. After that miserable job he's no long we my friend. > Maybe I'd still have the monkey? > > Feel free to contact me off list if you have any questions. > [email protected] > > Rob > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
