Jim, I have same 12 volt panel, but my 120 volt panel has larger amber lights.
The red lights on the 12 volt panel are all on a single circuit board. Luckily only the top one failed so far, so I was able to remove the corner of the board. The 1/4 inch light fit, but now I need to find the little clips that look like speed nuts to hold the light in place. The 120 volt lights have the clips on them. Joel On Tue, Sep 15, 2015 at 6:12 PM, Jim Watts via CnC-List < cnc-list@cnc-list.com> wrote: > Maybe you have a different panel? Mine were all the same size. > > http://members.shaw.ca/ptarmiganshift/images/IMG_1796.jpg > > > > Jim Watts > Paradigm Shift > C&C 35 Mk III > Victoria, BC > > On 14 September 2015 at 15:46, Steve Sharkey via CnC-List < > cnc-list@cnc-list.com> wrote: > >> That’s interesting. They were the same on mine. >> >> *From:* Joel Aronson via CnC-List <cnc-list@cnc-list.com> >> *Sent:* Monday, September 14, 2015 2:22 PM >> *To:* cnc-list@cnc-list.com >> *Cc:* Joel Aronson <joel.aron...@gmail.com> >> *Subject:* Re: Stus-List Indicator lights for breaker panel >> >> 12 volt and 110 were different sizes. quarter inch and three eights inch >> respectively >> >> On Monday, September 14, 2015, Jim Watts via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> It's been a long time since the project (9 years), I can't remember the >>> fine details...and the spares I bought are on the boat. I will attempt to >>> remember to check next time I'm out. >>> >>> Jim Watts >>> Paradigm Shift >>> C&C 35 Mk III >>> Victoria, BC >>> >>> On 14 September 2015 at 05:18, Steve Sharkey via CnC-List < >>> javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> wrote: >>> >>>> It’s .312” >>>> >>>> *From:* Jonathan Boocock via CnC-List >>>> *Sent:* Monday, September 14, 2015 8:06 AM >>>> *To:* javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com'); >>>> *Cc:* Jonathan Boocock >>>> *Subject:* Re: Stus-List Indicator lights for breaker panel >>>> >>>> Which size Paneltronics LEDs fit the C&C panel? >>>> Is it 1/4"? >>>> I also have a least 1 blown indicator light and would like to replace >>>> it/them. >>>> >>>> Jon >>>> C&C 44 >>>> Mor' Childs Play >>>> Kingston >>>> ------------------------------ >>>> _______________________________________________ >>>> >>>> Email address: >>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com'); >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com'); >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> >>> >> >> >> -- >> Joel >> 301 541 8551 >> >> ------------------------------ >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
