I’ve had the same problem, which prevented sleep in a rolly anchorage. A simple solution was to sheet the boom fairly tight, then use a short length of 3/8 inch line to pull the end of the boom over toward one side, in my case, to a jam cleat near the main jib sheet winch. This is part of my normal procedure before turning in for the night.
Mike C&C 30-2 “Limerick” Anacortes From: Dennis C. [mailto:[email protected]] Sent: Thursday, October 22, 2015 9:02 AM To: CnClist <[email protected]> Subject: Re: Stus-List boom Check the fasteners on the gooseneck/boom joint. Dennis C. On Thu, Oct 22, 2015 at 10:24 AM, Harald Braun via CnC-List <[email protected]<mailto:[email protected]>> wrote: Hi, I have a 1985 35 MK 3 C&C and my boom was making this awful squecking, grinding noise, once the main was down. I lubed it and still no luck. Really annoying in an anchorage. Anybody has any suggestions? Harald Kitchener, On
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
