Joel,

I have the Newmar GI-30 on Touche'.

I recently installed two GI-30's on an IP35 with separate 30 amp shore
power inlets.  Did some research on combining the two shore power circuits
on one isolator and, in the end, decided it best the isolate each.  Part of
the logic is you have no gaurantee that two 30 amp receptacles at a marina
will be wired from the same source.

Dennis C.
On Oct 27, 2015 12:47 PM, "Joel Aronson via CnC-List" <cnc-list@cnc-list.com>
wrote:

> And I have 2 30 amp circuits (although I only use one) and the cheap one
> can handle both.
>
> I don't mind the neighbors eating my zinc, it is the Max-Prop that is off
> the menu!
>
> Joel
>
> On Tue, Oct 27, 2015 at 1:39 PM, Della Barba, Joe via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> My Quicksilver and this one  (
>> http://www.defender.com/product.jsp?path=-1|328|2290032&id=1118395) have
>> the ABYC required failsafe capacitors. The cheap one does not appear to
>> meet this standard.
>>
>> Joe
>>
>> Coquina
>>
>>
>>
>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *ed
>> vanderkruk via CnC-List
>> *Sent:* Tuesday, October 27, 2015 1:20 PM
>> *To:* cnc-list@cnc-list.com
>> *Cc:* ed vanderkruk
>> *Subject:* Re: Stus-List Galvanic isolator - Good idea?
>>
>>
>>
>> I put one in when I refurbished my A/C electrical side.
>>
>> It isolates you from your neighbors which might slow down the zinc
>> consumption ... unless of course it is issues on your own boat causing you
>> problems.
>>
>> Many surveyors would recommend one if you are in a marina with shore
>> power.
>>
>> The particular one you have listed doesn't seem to be a 'fail safe' model
>> as the others in the same catalog category. Which is why they mention a
>> remote monitor being required.
>>
>> Ed
>>
>> On Oct 27, 2015 12:48 PM, "Joel Aronson via CnC-List" <
>> cnc-list@cnc-list.com> wrote:
>>
>> Does anyone use one of these:
>>
>>
>>
>> http://www.defender.com/product3.jsp?path=-1|328|2290032&id=605562
>>
>>
>>
>> Does it slow/stop electrolysis?  Most of the boats on my dock are plugged
>> in, and I go through a zinc or two a year.
>>
>>
>>
>> Will an isolater do anything besides lighten my wallet?
>>
>>
>>
>> --
>>
>> Joel
>> 301 541 8551
>>
>>
>> _______________________________________________
>>
>> Email address:
>> CnC-List@cnc-list.com
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>> _______________________________________________
>>
>> Email address:
>> CnC-List@cnc-list.com
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>>
>
>
> --
> Joel
> 301 541 8551
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to