Raspberry Pi itself is a very handy device. I've developed a data acquisition application at work on this platform and was thinking there must be someone to pioneer it in a boat electronics field. Thank you Josh for posting this.
Marek C320 Hamilton, ON On Wed, Oct 28, 2015 at 10:17 AM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > Digital Yatch made some pretty good marketing videos. > > As an alternative the openplotter project is already doing the signal k > conversion and streaming. Someone on the list turned me on to openplotter > and I've bought and setup the entire system. It's pretty straight forward, > scalable, and works...and cheap. I think I might have as much as $100 into > all the parts. > > NMEA 0183 multiplexer > AIS (sorta) > SignalK generator > Plotter > Lots of other extras > > http://www.sailoog.com/openplotter > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Oct 28, 2015 9:18 AM, "Joel Aronson via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> Just spent $200 on a flyer: >> >> >> https://www.kickstarter.com/projects/1689846268/ikommunicate-gateway-enabling-the-internet-of-thin >> >> If it works it will convert NMEA to an open source. >> >> -- >> Joel >> 301 541 8551 >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
