I've always needed just over 1gal to do a complete job. Maybe I could do it
thinner, but I don't think so. When I try to get by with one gallon, I paint
the first third completely, the leading edge of the keel, the complete rudder
and the first foot of depth. Then I do a very light and incomplete coat on the
remaining part. Since the water of our lake doesn't get much light penetration
below the first foot, it works reasonably well for slime. We have no critters
to worry about attaching to the hull.I use WM Bottom Shield now but used Petit
in the past until it got so expensive. It's usually good for 2yrs, but I don't
race my own boat any longer either.RonWild CheriC&C 30-1STL
From: Curtis via CnC-List <[email protected]>
To: "[email protected]" <[email protected]>
Cc: Curtis <[email protected]>
Sent: Saturday, January 9, 2016 9:39 PM
Subject: Stus-List Bottom paint help needed
Interlux Ultra with Biolux. How much paint should I need to paint my C&C 30 MK1
with 2 coats? 30 foot long and 10 foot beam?
--
Best regards,Curtis McDaniel,
C&C 30-MK1 East Coast Lady
Twenty years from now you will be more disappointed by the things that you
didn't do than by the ones you did do. So throw off the bowlines. Sail away
from the safe harbor. Catch the trade winds in your sails. Explore. Dream.
Discover. -Mark Twain
http://eastcostlady.blogspot.com/ [email protected] ~~~~ __/) ~~~~
.
_______________________________________________
Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
