What Gary describes is exactly how the reeling is configured on the booms of both my 38 and my 25. The only thing I might add to his description is that the pad eye and blocks are not directly under the reef cringles, but a couple of inches aft of that. The reef line not only holds the cringles down, it tensions the new foot of the reefed sail.
Rick Brass Sent from my iPad > On Apr 8, 2016, at 10:02, Gary Nylander via CnC-List <[email protected]> > wrote: > > On my ancient 30-1, the factory installed two stout pad-eyes on the port side > of the boom and two cheek blocks on the opposite side. Reefing line(s) run > from pad-eye up through cringle in sail, down to cheek block and then forward > to a winch on the starboard side of the boom. This assures that the reefed > foot of the sail is pulled taut against the boom. A bit ugly, but effective > in keeping the sail flat. > > Gary > > From: CnC-List [mailto:[email protected]] On Behalf Of Josh > Muckley via CnC-List > Sent: Thursday, April 7, 2016 11:18 PM > To: C&C List <[email protected]> > Cc: Josh Muckley <[email protected]> > Subject: Stus-List Boom fittings for reefing attachments > > Ok guys (& gals), > > I just had my boom repainted and as a result this has been a great time to > rebuild and replace all the associated pieces and parts. The boom wasn't > made with any place to attach reefing lines. Previously I had simply tied > them with a bowline on a bite around the boom. It works but I'm a little > apprehensive of the aesthetics and of the possible chaffing/wear on the new > paint. So I was toying with options. I thought about installing pad eyes on > the top or the bottom of the boom with machine screws. I'm not sure how well > the fasteners would handle the stress and it means drilling holes. It also > means removing the sail pack would be an even bigger pain in the butt. I > also considered having something in the boom track kinda like a slug stop > which would allow me to install a pad eye and slide it up and down the track > to its optimal position before fully tighten the screws to lock it in place. > See the attached picture of a slug stop. I was kinda hoping someone made > this type of thing (a pad eye anchored in a bolt rope track) but all I could > find was the harken bat-car system and it is designed to mount a track and > then have a car ride on the track. This seems costly and adds what seems > like considerable clew height. The clew height may be inconsequential since > the tack height is normally elevated from the boom anyway. > > Anybody have any ideas? > > Thanks, > Josh Muckley > S l/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
