Yup! I did. Mine stopped after about 3 days as the wood expanded. Keep your bilge pump on automatic and keep an eye on it.
It that doesn't work...I had a couple of suggestions from the list. Tighten the nut or else back it off a bit (water will pour in) and get some teflon tape around it and re-tighten) Mike Atacama 33mkii Sent wirelessly from my BlackBerry device on the Bell network. Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell. -----Original Message----- From: ahycrace--- via CnC-List <[email protected]> Sender: "CnC-List" <[email protected]> Date: Thu, 28 Apr 2016 18:05:02 To: <[email protected]> Reply-To: [email protected] Cc: <[email protected]> Subject: Stus-List leak ---- gary Kolc via CnC-List <[email protected]> wrote: I put Liberty in the water today and while doing my check of all thru hulls I noticed that the knot meter was leaking In between the large nut of the fixture and the wooden backing plate. Not much of a leak but noticeable more like a weep. The inside of the boat looks like a bomb went off which is usual the day it goes in, just a huge mess. I spent about 3 hrs cleaning and keeping an eye on the leak and as time went on it seemed to slow down I'm hoping it has stopped by tomorrow. Didn't someone else have the same problem not so long ago? Gary _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
