Sounds like how my masthead unit slowly died. It became intermittent.
Brought it down and it tested fine. Put it back up and it acted up again
after a short while. It was just too old. Failure of the wire is
possible, but I think less likely. The wire in my mast is inside a
narrow conduit. Not much room to "slap around"
Bill Bina
On 5/23/2016 3:14 PM, John Read via CnC-List wrote:
Fred Was getting erratic readings. Sent crew up mast. Removed sending
unit and plugged directly to receiving unit
Worked perfectly . Checked continuity from junction box to receive unit
Was perfect. Only part left is masthead wire. Visual inspection of box
at top where send unit plugs in looked good
Suspect issue with wire inside mast for many years slapping about. I
could check it for continuity this weekend. John
Sent from XFINITY Connect Mobile App
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
