But how would you handle connecting and disconnecting every time you step or 
unstep the mast? And how would you protect it from the elements?

I replaced the plugs numerous times and I seem to have a problem doing it 
reliably. And the worst part is that you have reasonably limited time when the 
mast is hanging in the mast crane.

I am using this: 
http://www.sea-dog.com/groups/1989-polarized-molded-electrical-connector. It 
works for a season or two; potentially longer, if you don’t disconnect it.

I am still looking for a good solution.

I am almost at the point where I am considering drilling through the deck and 
installing the wiring outside of the mast, so that it could be handled when the 
mast is already standing. But I hate to drill a hole and this would also put 
the connector in the harms way from my feet (on occasion).

Marek

From: Joel Aronson via CnC-List 
Sent: Friday, July 29, 2016 10:37
To: [email protected] 
Cc: Joel Aronson 
Subject: Re: Stus-List Two Prong DC outlet

I would use a terminal block, not a plug. 
http://www.defender.com/product3.jsp?path=-1|328|2289986|2289993&id=51890


Joel

On Fri, Jul 29, 2016 at 10:27 AM, Mark McMenamy via CnC-List 
<[email protected]> wrote:

  Hello Everyone,

  A while back I posted I was having trouble with my anchor light flickering 
and going out. I traced the problem to the outlet at the base of the mast. It's 
just a smidge too loose to make good contact all the time. There is a split on 
each prong of the plug which I have made bigger in order to get better contact, 
but the connection still fails unless I push the plug to one side or the other. 
Before I pull the outlet and replace it, I wondered if anyone had any ideas? 
I've also cleaned the outlet as best as I could. There was some corrosion, but 
it's gone now.

  As always, thanks a lot.

  Mark McMenamy
  C&C 25 "Icicle"
  Fort Pierce FL
  _______________________________________________

  This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!





-- 

Joel 
301 541 8551
_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Reply via email to