I would say 98% of non-commercial boats that should have an anchor ball or 
motoring cone do not have them or use them.
Joe
Coquina

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Marek 
Dziedzic via CnC-List
Sent: Monday, September 19, 2016 07:11
To: cnc-list@cnc-list.com
Cc: Marek Dziedzic
Subject: Re: Stus-List Electrical Question

If I am not mistaken, only on “designated anchorages” (and then you don’t need 
the light either)

Marek

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley 
via CnC-List
Sent: Monday, September 19, 2016 05:20
To: C&C List
Cc: Josh Muckley
Subject: Re: Stus-List Electrical Question


Re: anchor balls. I'm not saying that its not a good idea but I thought that 
the requirements for anchor dayshapes and lights was eliminated while in a 
charted anchorage or in a mooring field. Or is it just while on s mooring? Or 
am I just mistaken altogether?

Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD

On Sep 16, 2016 7:42 PM, "gnylander--- via CnC-List" 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
I have seen a few anchor balls around here (St. Michaels, MD) usually on boats 
visiting on their way up or down the ICW - there are two anchorages on the 
river, so they know what they are doing. Most don't. Some don't even display 
lights at night....

Gary


On Wed, 14 Sep 2016 10:39:53 -0400
Rick Brass via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> 
wrote:
West sells a fold up anchor ball for a relatively cheap $17. But I bet they 
don’t sell many. I’d not have a clue as to where you could go to buy a steaming 
cone. And I don’t think I’ve ever seen either one of these actually being used 
by a small boat. I do occasionally see day shapes displayed on the larger 
shrimp trawlers in our waters, but not often.


Rick Brass

Washington, NC





From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>] On 
Behalf Of Marek Dziedzic via CnC-List
Sent: Wednesday, September 14, 2016 9:59 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Marek Dziedzic <dziedzi...@hotmail.com<mailto:dziedzi...@hotmail.com>>
Subject: Re: Stus-List Electrical Question



Rick,



you do (so triple points for you (each point can be converted to a drink of 
your choice when visiting on my boat)). Though, I should have said that 
professionals should not apply (;-).



I don’t have the day shapes either, but I have to say that a long while ago I 
used to sail on a boat that regularly displayed the black ball when anchoring. 
And we used to carry both the black ball and the black cone. However, I don’t 
remember ever displaying the inverted cone. And I don’t think I ever saw an 
inverted cone displayed.



Marek

Ottawa, ON


_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!
_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Reply via email to