I used overlapping strips of duct tape on top of the hole, and finished off with a strip around the circumference.
Damian
C&C 34 Ghost
On Dec 8, 2016 9:02 PM, Nate Flesness via CnC-List <cnc-list@cnc-list.com> wrote:
Dishpan turned upside down and duct-taped/tied to ropes to the handholds......NateSarah Jean1980 30-1On Thu, Dec 8, 2016 at 1:38 PM, robert via CnC-List <cnc-list@cnc-list.com> wrote:Bucket turned upside down....is that "elegant"?
On 2016-12-08 12:53 PM, RANDY via CnC-List wrote:
I did the board-and-rock thing last offseason :)
This year I was looking for something a little more "elegant" :)
Cheers,Randy StaffordS/V GrenadineC&C 30-1 #7Ken Caryl, CO
From: "Joel Aronson via CnC-List" <cnc-list@cnc-list.com>
To: "cnc-list" <cnc-list@cnc-list.com>
Cc: "Joel Aronson" <joel.aronson@gmail.com>
Sent: Thursday, December 8, 2016 9:35:03 AM
Subject: Re: Stus-List Looking for Tips on ROD Re-Rigging Process
heavy plastic and zip ties daisy chained together. You can top it with a small piece of wood and a rock or other weight.
I'm rewiring my mast too. Marinebeam masthead and steaming lights, Got this for the VHF:MPD Digital rg-213-pl259-75ft 75-Feet RG8u RG-213 Coax Antenna Cable with Amphenol
Joel
_______________________________________________
This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray
All Contributions are greatly appreciated!