All,
I have been following this discussion with interest since I just returned
to my southern project boat with a so-far unused ATN Top Climber, and intend to
use it in the next couple of days. I have taken note in particular to the idea
of using a loop(s) to stay at the mast. The designer of the device however, has
at least in the past, suggested securing the static line away from the mast
because it makes the climb easier. I have not tried it either way, but I like
the sound of staying at the mast better. Anyone have comments on this aspect of
using the ATN climbing gear? Obviously the boat would have to be pretty steady.
On a separate note regarding fall arrest. I had a conversation one time with an
accomplished ice climber and asked him what type of line he preferred, nylon or
low stretch. He seemed to think that I was a complete idiot for even asking the
question, and maybe I was. Anyway, just to save anyone else who has not thought
it through from similar embarrassment or injury, you definitely want any line
that might arrest a fall to be stretchy. Nylon in other words.
I plan therefore to use polyester for the static line, and nylon for any safety
fall arrest lines.
Steve Thomas
C&C36
Merritt Island, FL
---- Joe Della Barba via CnC-List <[email protected]> wrote:
http://www.dellabarba.com/sailing/images/upmast.jpg
Working on a topping lift in the Gulf Stream. If you are climbing underway,
MAKE SURE you have a loop to hold you near the mast. It does not look rough in
that photo, but the swells at 55 feet up were enough to make it hard to hang
on, and if you get loose you will hit one or more things pretty hard.
Joe Della Barba
[email protected] <mailto:[email protected]>
Coquina
From: CnC-List [mailto:[email protected]] On Behalf Of Rick Rohwer
via CnC-List
Sent: Thursday, March 16, 2017 11:19 PM
To: Joel Aronson via CnC-List <[email protected]>
Cc: Rick Rohwer <[email protected]>
Subject: Re: Stus-List Climbing the mast solo
I use the same ascenders with my own concoction of straps but unlike the fellow
in the “atninc" ad I prefer a bosun’s chair to a climbing harness. Plenty of
pockets for tools and your vitals don’t go numb. These allow you to actually
climb above the top of the mast so you can work readily on mast top fittings.
Rick
Paikea 37+
On Mar 16, 2017, at 8:12 AM, Frederick G Street via CnC-List
<[email protected] <mailto:[email protected]> > wrote:
Ryan — many on the list prefer a standard climbing harness and ascenders for
this type of job. I personally prefer to sit while working for long periods of
time, so I use the ATN TopClimber (now called the “MastClimber”):
http://www.atninc.com/atn-mastclimber-sailing-equipment.shtml
I’ve had very good luck with this equipment; in a previous life as a marine
electronics installer, I spent a LOT of time up masts, and always felt safe and
comfortable.
YMMV…
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
