Steve- I put a bunch of pictures of my starboard settee, including with measurements of the plywood piece, at https://drive.google.com/open?id=0B-NqAxQ6JxFTRmlMT2g0anYwTHM .
Cheers, Randy ----- Original Message ----- From: "RANDY via CnC-List" <[email protected]> To: "cnc-list" <[email protected]> Cc: "RANDY" <[email protected]> Sent: Tuesday, July 11, 2017 7:41:34 PM Subject: Re: Stus-List C&C 30 MK1 General Questions My 1972 30 MK I (hull #7) has the same metal brackets, which go through slots in a piece of plywood that slides inboard to make a wider berth. The plywood piece has a piece of trim along the inboard edge that acts as a fiddle to hold the cushion in place. I'll try to remember to snap a couple pictures tomorrow night to post for you. Cheers, Randy ----- Original Message ----- From: "Joseph Bognar via CnC-List" <[email protected]> To: "cnc-list" <[email protected]> Cc: "Joseph Bognar" <[email protected]> Sent: Tuesday, July 11, 2017 7:13:07 PM Subject: Re: Stus-List C&C 30 MK1 General Questions I would replace the water tank and not take any chances with it . Some photos of your sette would help also. My 30 is of the 1979 vintage . I have an extra piece of plywood on top of the sette . It slides between the metal brackets and pulls out to make the bed a bit bigger to lay on . Sent from Joe Bognar On Jul 11, 2017, at 7:59 PM, Steven A. Demore via CnC-List < [email protected] > wrote: Need some help/advice from some more experienced C&C people. I am rebuilding a ’73 30 MK1 project boat, that was started a few years ago by another person and abandoned along the way. I am focused on the settee area right now. First, I think I can get the mold cleaned out of the water tank, but it looks like there are some fine cracks in the bottom. Is there something that I can do to seal it up (paint, liner, ?) that would be safe for potable water? Second, the settee itself has a couple of metal brackets on the top that would keep cushions from sitting flat. Can somebody tell me how the settee goes together, i.e. is there a board on top or something? A picture might be helpful as well, since I am going to have to build whatever goes in there. I’m sure that I’ll have a lot more questions as this project commences, so thanks in advance! Steve SV Doin’ It Right 1973 C&C 30 MK1 Pasadena, MD <blockquote> _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! </blockquote> _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
