Boots Of Spanish Leather WRITTEN BY: BOB DYLAN Oh, I’m sailin’ away my own true love I’m sailin’ away in the morning Is there something I can send you from across the sea From the place that I’ll be landing?
Sent from my iPhone > On Jul 30, 2017, at 4:33 PM, G Collins via CnC-List <[email protected]> > wrote: > > The song Mr. Tambourine Man does have the line "take me on a trip upon your > magic swirlin' ship", and there is a C&C here with the name Magic Swirlin' > Ship > Graham Collins > Secret Plans > C&C 35-III #11 >> On 2017-07-30 1:46 PM, Ronald B. Frerker via CnC-List wrote: >> "I am younger than that now." >> >> Must be a Dylan fan. >> Does he have any songs about sailboats? Anything we can adapt to old C&Cs? >> Finally had a day under 90 F friday and went out sailing. Winds at 20 with >> gusts as high as 28mph; used my 160% genny only and it was a great choice, >> although tacking took a while. Once through the tack, the wind just kept >> blowing the bow down. Had to gain speed and nurse it back to windward. >> Downwind was a blast! >> Ron >> Wild Cheri >> C&C 30-1 >> STL >> >> From: Dennis C. via CnC-List <[email protected]> >> To: [email protected] >> Cc: Dennis C. <[email protected]> >> Sent: Saturday, July 29, 2017 5:57 PM >> Subject: Re: Stus-List Rigid boom vangs - rivets vs screws >> >> Too funny. After my post favoring SS rivets, I get to Touché today to see >> 1/4 inch Phillips machine screws on the vang bracket. :) >> >> Well, it was many years ago when I installed it; I am younger than that now. >> >> Dennis C. >> >> Sent from my iPhone >> >> On Jul 27, 2017, at 9:08 AM, Rick Brass via CnC-List <[email protected]> >> wrote: >> >> One thing to remember about the Garhauer vang is that the attachment to both >> the mast and the boom are custom made for the boat (you send them the >> profile of the mast and boom when you order the vang), and the plates >> attached to the mast and boom wrap significantly around the spars. (On my 25 >> about half of the boom is cradled in the attached plate. ) So the fasteners >> connecting the plate to the spar are under primarily shear loading, not >> tensile. >> >> For this sort of configuration, the additional cross section of the machine >> screw (or cap screw, if you use those) would seem the better choice. If, >> however, you have something like a Boomkicker, or a vang with “generic” >> mounting plates that don’t curve around the spars, rivets might be a better >> choice. >> >> Rick Brass >> Imzadi C&C 38 mk2 #47 >> la Belle Aurore C&C 25 mk1 #225 >> Washington, NC >> >> BTW, both have Garhauer vangs. >> >> >> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
