Bill:
Just curious....how did you remove the diesel from the old tank?
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2017-09-14 1:43 PM, William Walker via CnC-List wrote:
Moving ahead on the project. Old tank out. New ordered and delivered
by Amazon in 2 days..Moeller 19 gallon, 16 x 12 x 26. 90 degree hose
and straight hose connector as I think Dennis mentioned.
Two questions:
First, if I leave at least 2 inches of the 1.5 inch fuel line inlet
connector, can I trim its height if I need to? It is going to be
really tight to get the 90 degree elbow on. need to keep the plastic
"sawdust" out of tank somehow.
Second, the old aluminum tank was bonded to the deck filler and the to
the engine block. Since this is plastic tank should I skip tank and
bond deck filler directly to engine? What about the sending unit.
Thanks
Bill Walker
CnC 36
Pentwater, Michigan
Sent from AOL Mobile Mail
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
