Do you have a tractor supply/repair store near you? Pull the switch, take it to their parts guy. He will probably have a replacement.
Otherwise, it should be fairly available online. I'm not familiar with that exact switch but you're probably looking for a 4 position ignition switch. The 4 positions should be : Off, Ign, Start and Pre-heat or Heat. A switch with the correct order of the positions is what you're looking for. Dennis C. Touche' 35-1 #83 mandeville, LA On Sun, Oct 8, 2017 at 8:09 AM, Eric Frank via CnC-List < [email protected]> wrote: > The ignition switch on my Perkins control panel (engine installed in 1980) > lost its hinged rubber cover a couple of years ago, and now no longer > springs back from the glow plugs only position. Can people on this list > suggest where to purchase a replacement switch? It has several positions: > off, on, glow plugs only, start. The switch now doesn’t automatically > remove power from the glow plugs when the key is released. The rest of the > panel is still working well (temperature and RPM gauges) so I would rather > replace just the switch. I have included a picture of the panel here: > https://www.dropbox.com/s/txkent6abpwpdvm/PerkinsControlPanel.JPG?dl=0 > > Eric Frank > Cat's Paw > C&C 35 Mk II > Mattapoisett, MA > > > _______________________________________________ > > The bills have started coming in for the year 2018 and have gone up > again. October will be our fund raising month. Please consider sending a > small contribution to help keep this list running. Use PayPal to send > contribution -- https://www.paypal.me/stumurray > > All contributions are greatly appreciated! > >
_______________________________________________ The bills have started coming in for the year 2018 and have gone up again. October will be our fund raising month. Please consider sending a small contribution to help keep this list running. Use PayPal to send contribution -- https://www.paypal.me/stumurray All contributions are greatly appreciated!
