Matt,I am pretty sure that later unit 2 torque tubes are the same shape as the
early ones therefore will fit into your lower housing. I know that Harken
changed how the sections are connected so if you can find series2 or maybe
later sections and proper conecters you should be good to go.On the off chance
that you have to go more modern,you maybe able to swap the lower torque
housing.A good rigger with
H arken experience should be able to help. Good luck! Lee .Christiansen 1987
C&C 35-3
-----Original Message-----
From: Matthew L. Wolford via CnC-List <[email protected]>
To: cnc-list <[email protected]>
Cc: Matthew L. Wolford <[email protected]>
Sent: Fri, Apr 27, 2018 9:04 am
Subject: Stus-List Harken furling question
Listers:
Question for you. I have an ‘80s vintage Harken roller furler -- Mk I,
Unit 2 – with a damaged torque tube. Harken no longer supplies replacement
parts for this unit. I have done a couple internet searches and looked on
e-Bay for a used torque tube to no avail. Do any of you have any idea where I
might find one? Thanks in advance for your suggestions.
Matt Wolford
C&C 42 Custom
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
