Is your quadrant an Edson radial wheel? From my Android...
________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of David via CnC-List <cnc-list@cnc-list.com> Sent: Wednesday, June 6, 2018 1:51:13 PM To: cnc-list@cnc-list.com Cc: David Subject: Re: Stus-List Re: Below deck auto pilot installation for C&C 40 (David) My 40 (not the aft cabin) has the drive installed upside down and bolted to the cockpit floor. I would think there would be enough space for the tiller arm as mine has one installed. The aft cabin model should not be that much different back there...but perhaps they are. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Don Marlin via CnC-List <cnc-list@cnc-list.com> Sent: Wednesday, June 6, 2018 1:38 PM To: cnc-list@cnc-list.com Cc: Don Marlin Subject: Stus-List Re: Below deck auto pilot installation for C&C 40 (David) My boat is a 1983 C&C 40 AC. The aft part should be similar to most C&C 40's. Thanks David. Specifically I was looking for ideas around the quadrant. Right now the quadrant is tight between the rudder tube and the deck and there is no space. I have seen others online who have used the existing quadrant but I view this as option B. So I like to see what others have done and then decide on the scope. Thanks Dave for the link, shelf looks good and will ado[pt some ideas. I plan to use an Octopus drive and Raymarine head. On Wed, Jun 6, 2018 at 12:00 PM, <cnc-list-requ...@cnc-list.com<mailto:cnc-list-requ...@cnc-list.com>> wrote: Send CnC-List mailing list submissions to cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> To subscribe or unsubscribe via the World Wide Web, visit http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com or, via email, send a message with subject or body 'help' to cnc-list-requ...@cnc-list.com<mailto:cnc-list-requ...@cnc-list.com> You can reach the person managing the list at cnc-list-ow...@cnc-list.com<mailto:cnc-list-ow...@cnc-list.com> When replying, please edit your Subject line so it is more specific than "Re: Contents of CnC-List digest..." Today's Topics: 1. Re: Below deck auto pilot installation for C&C 40 (David) ---------------------------------------------------------------------- Message: 1 Date: Wed, 6 Jun 2018 15:59:12 +0000 From: David <davidrisc...@msn.com<mailto:davidrisc...@msn.com>> To: "cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>" <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 Message-ID: <cy4pr16mb16538b32f89dcbcb7f319191da...@cy4pr16mb1653.namprd16.prod.outlook.com<mailto:cy4pr16mb16538b32f89dcbcb7f319191da...@cy4pr16mb1653.namprd16.prod.outlook.com>> Content-Type: text/plain; charset="windows-1252" Dave...call my cell to discuss. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of Dave Godwin via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Wednesday, June 6, 2018 11:50 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Dave Godwin; Don Marlin Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s version?) is similar. I did this<http://roninrebuild.blogspot.com/2014/02/autopilots-from-wheel-to-below-deck.html>. Not perfect but it works. Best, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/> On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>>> wrote: I am starting to plan a below deck Autopilot for my C&C 40. I have looked below and it is clear that I will need to make some modifications to support a tiller arm. I was wondering if there are any other 40 owners who could share pictures of their installations. Currently I have a wheel pilot and it is good for motoring and light winds. Looking for something more capable. Thanks in advance Don Marlin _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20180606/dcb01df8/attachment-0001.html> ------------------------------ Subject: Digest Footer _______________________________________________ CnC-List mailing list CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ------------------------------ End of CnC-List Digest, Vol 149, Issue 21 ***************************************** -- Don Marlin (613) 832 4040
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
